Recaro and STM Isofix Base
Base for securing the Young Expert, Young Profi, and Twin0+ Infant car seat to the Isofix points mounted in the car.
The Recaro and STM Isofix system is classified as Semi Universal. A full list of approved vehicles can be found on the Recaro.com web site. This list is constantly updated and will give a good indication of whether it is compatible with your car. One of the main reasons that this base may not be compatible is if your car has a storage box in the floor – many Renaults have these! The car's floor must be solid where the bases foot meets the car floor pan.
The base is easily fitted to the mounting points in the car. These fittings are put in place at the time of manufacture and cannot be retro fitted, so it is important to do a physical check that they are fitted in your car before ordering.
Using the Isofix fittings provides a direct link between the vehicle bodyshell and the child seat so provides optimum protection.
The base will give clear indication that it is fitted correctly, showing green flashes; once the base is fitted the child seat is easily clipped into the base.
Young Profi and Twin 0+ .
These are the infant car seats produced by Recaro and will be fitted on to the base facing the rear of the car. The base moves backwards and forwards to allow these seats to clip in easily. Read your instructions carefully.
The Young Expert is the second stage seat ( Group 1 ). This will take a child from 9kg to 18kg around 4 years. This seat will be fitted to the base forward facing. When changing between seats the base can remain in the car.
If you have 2 cars with Isofix Fittings it would be possible to have two bases but share the one car seat.
