Double Kit For SP , Classic & Dash Buggy
This simple kit will completely change your single buggy into a double buggy, with minimal cost or hassle, keeping the buggy well balanced and compact.
Top seat for big person!
When you have a newborn baby to accommodate, the main seat unit is reclined to give baby a completely flat bed, the bumper bar is removed, the double kit has a pair of knuckles supplied with it, these are placed in the holes left when you removed the front bumper bar, allowing the extra seat to be place on top above the reclined original seat, this is where the older child sits high up and in charge!!
The baby is placed underneath feet first, so baby always has eye contact with you as you travel along the road. A double storm cover and sun mesh is available to protect them both from the elements.
The buggy can be folded in the usual way taking up no extra space and without the need to remove the top seat.
Back seat driver
Once baby needs to sit in a upright position it is time for a change round, the seat is then removed, the main seat fabric is zipped up and folded into an upright position and clipped into place, the bumper bar can now be replaced, this seat is now used by the older child still on top and in charge. The extra seat is then placed behind the main seat, under the handle bar on two purposely positioned protrusions above the storage basket. Baby is then slid into place harnessed in still with adult eye contact, and you are ready to go.
Two children, two seats all in the space of a single buggy.
NOTE : When folding the buggy with the second seat unit in this position you will need to remove it before folding
REMEMBER : The Big Kid always sits at the front - either in the top seat with baby under or in the main seat with baby behind.
